IP REMOTE CONTROL SOFTWARE

RS-BA1

Version2

Further Advanced Dualwatch Remote Control Software

Remote Base Operation Whether users are in another room, home, or another state, the RSBA1 allows users to operate their ham shack with only an IP connection. Version 2 of RSBA1 adds more features to the software, making interoperability between transceivers such as the IC-7610 or the IC-9700 interface simpler.

Descriptions

Dualwatch, Dual Spectrum Scope Control

The dualwatch operation and dual spectrum scopes with the waterfall functions* can be used on your remote PC. MAIN and SUB spectrum scopes can be observed on the RS-BA1 at the same time. Of course, the RS-BA1 can be used with Icom single receiver transceivers.

* The dualwatch and dual spectrum scope functions are only for the IC-7851, IC-7850 and IC-7610. The spectrum scope functions (single receive) are usable with the IC-7300, IC-9700 and IC-705.

Most Functions Can Be Controlled

Most functions and modes of your transceiver, including interference rejection functions and IF filter settings, can be controlled using the CI-V commands. The following functions are added to the RS-BA1 Version 2.

  • Panel size can be enlarged (Normal or large size selectable)
  • Indicator click operation to change the settings
  • RIT and ⊿TX functions
  • [MUTE] button
  • SUB dial

Low Latency, High Quality Audio Over an IP Network

The RS-BA1 offers real-time operation with low latency, high quality audio. You can use the transceiver installed in another room using your home network, or even from a remote location over the Internet*.

* A static public IP address or Dynamic DNS is required for the base station (Server) PC, when you configure the remote control system through the Internet.
 

Functions Compatibility Chart

IC-7851
IC-7850
IC-7800
IC-7700
IC-7610 IC-7600 IC-7410
IC-9100
IC-7300 IC-7200 IC-7100 IC-9700 IC-705
Dualwatch Function

-

-

-

-

-

-

-

-
Server Function

-

-

-

-

-

Remote Power ON/OFF

-

-

Spectrum Waterfall Scope

-

-

-

-

-

Scroll Mode

-

-

-

-

-

-

-

APF AF Level Adjustment

-

-

-

-

-

-
CW Keyer

-

Voice Recording/Playback

USB Dial with
Optional RC-28


✓ : Function available. - : Function Not available.
*Depending on your transceiver, some functions or modes cannot be used, or you need to update
the transceiver’s firmware.
Please use the latest firmware version of the transceiver.

Specifications

PC (Base station or Remote station)
* When only one transceiver and one PC are connected to the Server PC.

Operating System

Windows 11 (64 bit),
Windows 10 (32/64 bit),
Windows 8.1 (32/64 bit),
(Except for Windows RT)

CPU

1.8 GHz Processor or better
(Multi-core Processor required for Windows 11)

Memory

Windows 11 (64 bit): 4 GB or more
Windows 10 (32 bit): 2 GB or more
Windows 10 (64 bit): 4 GB or more
Windows 8.1 (32 bit): 2 GB or more
Windows 8.1 (64 bit): 4 GB or more

Hard disk space

150 MB or more of available disk space
*The Voice Memory or Recording function will require more space.

Network data speed
(When the default audio quality is used)
To use the Dualwatch function
(IC-7851/7850/7610)

For the Base station:
Upload: 1.2 Mbps Download: 350 kbps, or faster

For the Remote station :
Upload: 350 kbps Download: 1.2 Mbps, or faster

Other models
(Other than the
IC-7851/7850/7610)

For the Base station:
Upload: 500 kbps Download: 350 kbps, or faster

For the Remote station :
Upload: 350 kbps Download: 500 kbps, or faster

Display Resolution

1024 × 768 pixels (enlargeable)

Other

Speaker and microphone or headset (purchase separately)
On-board sound chipset recommended

This is the minimum system requirement to use the RS-BA1 Version 2.
Because the system requirements may differ, depending on your PC environment (permanently running software such as antivirus software, peripheral devices, network condition, settings of OS and other software), the operation is not guaranteed.

All stated specifications are subject to change without notice or obligation.

Supplied Accessories

  • USB flash drive (#22) or CD (#12) (including RS-BA1 installer, instruction manual, USB driver and USB driver installation guide)
  • USB cable (A-B type)
  • Installation guides

Note for original version RS-BA1 users: Free upgrade service from RS-BA1 to RS-BA1 Version 2 is not available. To obtain the new features in the RS-BA1 Version 2, the purchase of a new software package is required.

Catalogs / Brochures

Brochures Name Size
RS-BA1 Version 2 691KB

Instruction Manual / Guides

Name Model Name Note
Remote Encoder for RS-BA1 RC-28
Installation Guide for Windows 11/10/8.1 USB3.0 Supported USB Driver (Ver.1.30) CS-7100/CS-9100/CS-9700/CS-R8600/IC-7300/RS-BA1/RS-R8600
Installation Guide for Windows 11/10/8.1 USB Driver IC-705/ID-52A/ID-52E/RS-BA1 Version 2

Firmware / Software

Type Model Name Version Last Update
Control software RS-BA1 Version 2 Version 2.60 May.16.2024